Troubleshooting

Zebra ZT610 and ZT620 troubleshooting: alerts, lights and fixes

What the yellow or red screen and the lights on a ZT610 or ZT620 mean, and how to clear Head Open, Media Out, Ribbon Out, wrinkles and faded print.

15 min Difficulty: Easy Updated: By SCANSHOP team
In this guide

    When the ZT610 or ZT620 needs attention, the Home screen turns yellow or red and the lights change. Touch the icons in the top bar to read the message. Both models use the same messages and lights.

    Find your symptom

    What you see Likely cause Fix
    "Head Open"; STATUS red PAUSE yellow Printhead not fully closed Fix 1 →
    "Media Out"; STATUS red SUPPLIES red Labels out, loaded wrongly or not detected Fix 2 →
    "Ribbon Out" SUPPLIES red or "Ribbon In" SUPPLIES yellow Ribbon missing or not detected, or print type does not match Fix 3 →
    Creases or fine diagonal lines across the print Ribbon wrinkles: uneven printhead pressure, ribbon or media path Fix 4 →
    Pale or patchy print, barcodes don't scan Darkness or speed, dirty printhead, pressure Fix 5 →
    "Paper Jam" Labels stuck in the path or wrapped around the platen roller Fix 6 →
    "Head Over Temp" STATUS yellow, "Head Under Temp" STATUS yellow, "Head Maintenance Needed", "Replace Printhead" Printhead temperature, dirt or wear Fix 7 →
    NETWORK red or off, no IP address, network settings locked No link, wrong IP settings or Protected Mode Fix 8 →

    STATUS green means ready. PAUSE yellow on its own means the printer is paused: press PAUSE to continue.

    Fixes

    1. Head OpenSTATUS red, PAUSE yellow

    CauseThe printhead is not fully closed, or more rarely the printhead-open sensor is faulty.

    Fix

    1. Open the media door and turn the printhead-open lever down until the printhead locks.
    2. If the message stays with the printhead locked, contact us: the sensor needs service.
    2. Media OutSTATUS red, SUPPLIES red

    CauseLabels have run out or are loaded incorrectly, the media sensor is out of position, or the label type setting does not match the labels.

    Fix

    1. Load a new roll if needed and check the path: under the dancer assembly, through the media sensor, under the printhead, with the labels touching the inside back wall of the sensor.
    2. For notched or punched labels, remove the ribbon and turn the gold sensor adjustment wheel until the green light lines up with the notch or hole.
    3. Check Print › Print Quality › Label Type and run a manual calibration. Details: Calibrate the ZT610 and ZT620.
    3. Ribbon Out or Ribbon InSUPPLIES flashing red or yellow

    CauseRibbon Out: in thermal transfer mode the ribbon is missing, loaded wrongly or not detected, or the printer is set to thermal transfer for direct thermal labels. Ribbon In: a ribbon is loaded in direct thermal mode.

    Fix

    1. Reload the ribbon. Under the printhead it must run as far back as it goes, close to the inner wall of the printer, or the ribbon sensor cannot see it.
    2. Run a manual calibration with labels and ribbon loaded.
    3. Direct thermal labels: set Print › Print Quality › Print Type to Direct Thermal, and the same in your driver. Ribbon In does not stop printing; remove the ribbon, or set Thermal Transfer if your labels need ribbon.
    4. Still Ribbon Out with the ribbon loaded correctly? Use System › Settings › Restore Defaults › Restore Printer. This resets all settings except network settings, so you set your print settings again afterwards.
    4. Ribbon wrinklescreases or fine lines in the print

    CauseUneven printhead pressure, a badly loaded ribbon, the wrong heat setting, or labels moving sideways.

    Fix

    1. Reload the ribbon straight and tight, and check that the media guide touches the edge of the labels.
    2. Look at the direction of the wrinkles. From lower left to upper right: increase the outside toggle pressure or decrease the inside toggle. From upper left to lower right: increase the inside toggle or decrease the outside toggle. In the middle: move both toggles towards the centre of the label.
    3. Lower the darkness or the print speed under Print › Print Quality.
    4. Zebra's printhead pressure and toggle position procedure shows the adjustment. If wrinkles continue, contact us.
    5. Faded or patchy printbarcodes don't scan

    CauseDarkness or speed does not suit the labels and ribbon, the printhead is dirty, or the pressure is uneven.

    Fix

    1. Run Wizards › Print › Start Print and use Print Quality Assistance: pick the best test label and the printer sets darkness and speed.
    2. Or change Print › Print Quality › Darkness (0.0–30.0) in small steps and lower the print speed. Use the lowest darkness that gives a good result, as too much heat blurs barcodes and wears the printhead.
    3. Clean the printhead: with the printer off and the head cool, wipe the brown strip on the printhead from end to end with a swab and 99.7 % isopropyl alcohol, then clean the platen roller while you turn it. Let it dry.
    4. Light on one side only: increase the inside toggle pressure for the left side, the outside toggle for the right side.
    5. Check the coated side of the ribbon and that the print type matches your labels.
    6. Paper Jamlabels stuck in the printer

    CauseLabels are loaded wrongly, stuck to parts of the media path, or wrapped around the platen roller.

    Fix

    1. Switch off, open the printhead and remove the stuck labels.
    2. If labels wrapped around the platen roller, remove them and clean the roller with isopropyl alcohol.
    3. Reload the labels and press PAUSE.
    7. Printhead alertstemperature, maintenance, end of life

    CausePrinthead temperature, dirt, wear, or a non-genuine printhead.

    Fix

    1. Head Over Temp: let it cool. Printing resumes by itself. If it repeats, move the printer to a cooler spot or lower the print speed.
    2. Head Under Temp: keep printing while the head warms up, or move the printer to a warmer place. If it persists, contact us.
    3. Head Maintenance Needed: clean the printhead as in Fix 5.
    4. Head Element Out or Replace Printhead: the printhead is worn or damaged. If print quality suffers, it needs replacing.
    5. STATUS, PAUSE and DATA all red: the printhead is not a genuine Zebra part. Fit a genuine printhead.
    8. Network problemsNETWORK light red or off

    CauseWired: off means no link, red an Ethernet error. Wi-Fi: flashing green means a weak signal, red a wireless error. On printers placed on the EU market from August 2025, Zebra's Protected Mode security setup applies to network settings.

    Fix

    1. Check the cable, then print Connection › Networks › Print: Network Info.
    2. For a fixed address, set Connection › Wired › Wired IP Protocol to PERMANENT, enter the address, subnet and gateway, then touch Connection › Networks › Reset Network.
    3. If the display asks for a front-panel PIN, set it and the Protected Mode password as described in Zebra's Link-OS PrintSecure Printer Administration Guide (zebra.com/asr). With Protected Mode on, Zebra says network settings can't be changed on the display, only with the Protected Mode password via JSON commands.

    Setup steps are in the ZT610 and ZT620 setup guide. More help: ZT610 guides and ZT620 guides.

    Frequently asked questions

    What does a red screen on the Zebra ZT610 mean?

    A red or yellow Home screen means an alert or error, and printing usually stops until you fix it. Touch the icons in the top bar to read the message.

    How do I reset a ZT610 or ZT620 to factory settings?

    Use System › Settings › Restore Defaults › Restore Printer, or hold FEED and PAUSE while you switch the printer on. This keeps the network settings; Restore Network (CANCEL and PAUSE at power-up) resets those.

    How often should I clean the printhead?

    Zebra recommends cleaning it after every ribbon roll with thermal transfer, and after every label roll with direct thermal.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the ZT610.

    Compatible ribbons

    ProductWidth Length Type Ink sideCorePrice
    Zebra 5095 Resin Ribbon 40 mm × 450 m, Out, Black (05095BK04045) Zebra 5095 Resin Ribbon 40 mm × 450 m05095BK0404540 mm 450 m Resin Outside25.4 mm466,00 Kč+VATIn stock
    Zebra 5095 Resin Ribbon 60 mm × 300 m, Out, Black (05095BK06030) Zebra 5095 Resin Ribbon 60 mm × 300 m05095BK0603060 mm 300 m Resin Outside25.4 mm468,00 Kč+VATIn stock
    Zebra 4800 Resin Ribbon 80 mm × 450 m, Out, Black (04800BK08045) Zebra 4800 Resin Ribbon 80 mm × 450 m04800BK0804580 mm 450 m Resin Outside25.4 mm648,00 Kč+VATIn stock
    Zebra 5095 Resin Ribbon 83 mm × 300 m, Out, Black (05095BK08330) Zebra 5095 Resin Ribbon 83 mm × 300 m05095BK0833083 mm 300 m Resin Outside25.4 mm647,00 Kč+VATIn stock
    Zebra 5095 Resin Ribbon 89 mm × 450 m, Out, Black (05095BK08945) Zebra 5095 Resin Ribbon 89 mm × 450 m05095BK0894589 mm 450 m Resin Outside25.4 mm1.036,00 Kč+VATIn stock
    Zebra 2100 Wax Ribbon 102 mm × 450 m, Out, Black (02100BK10245) Zebra 2100 Wax Ribbon 102 mm × 450 m02100BK10245102 mm 450 m Wax Outside25.4 mm326,00 Kč+VATIn stock
    Zebra 2100 Wax Ribbon 106 mm × 450 m, Out, Black (02100BK10645) Zebra 2100 Wax Ribbon 106 mm × 450 m02100BK10645106 mm 450 m Wax Outside25.4 mm339,00 Kč+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 300 m, Out, Black (05095BK11030) Zebra 5095 Resin Ribbon 110 mm × 300 m05095BK11030110 mm 300 m Resin Outside25.4 mm858,00 Kč+VATIn stock
    Zebra 4800 Resin Ribbon 40 mm × 450 m, Out, Black (04800BK04045) Zebra 4800 Resin Ribbon 40 mm × 450 m04800BK0404540 mm 450 m Resin Outside25.4 mm324,00 Kč+VATOut of stock View
    Zebra 5095 Resin Ribbon 60 mm × 450 m, Out, Black (05095BK06045) Zebra 5095 Resin Ribbon 60 mm × 450 m05095BK0604560 mm 450 m Resin Outside25.4 mm699,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 80 mm × 450 m, Out, Black (03200BK08045) Zebra 3200 Wax/Resin Ribbon 80 mm × 450 m03200BK0804580 mm 450 m Wax/Resin Outside25.4 mm455,00 Kč+VATIn stock
    Zebra 5095 Resin Ribbon 83 mm × 450 m, Out, Black (05095BK08345) Zebra 5095 Resin Ribbon 83 mm × 450 m05095BK0834583 mm 450 m Resin Outside25.4 mm967,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 89 mm × 450 m, Out, Black (02300BK08945) Zebra 2300 Wax Ribbon 89 mm × 450 m02300BK0894589 mm 450 m Wax Outside25.4 mm245,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 102 mm × 450 m, Out, Black (02300BK10245) Zebra 2300 Wax Ribbon 102 mm × 450 m02300BK10245102 mm 450 m Wax Outside25.4 mm281,00 Kč+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 450 m, Out, Black (05095BK11045) Zebra 5095 Resin Ribbon 110 mm × 450 m05095BK11045110 mm 450 m Resin Outside25.4 mm1.281,00 Kč+VATIn stock
    Zebra 4800 Resin Ribbon 60 mm × 450 m, Out, Black (04800BK06045) Zebra 4800 Resin Ribbon 60 mm × 450 m04800BK0604560 mm 450 m Resin Outside25.4 mm486,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 83 mm × 300 m, Out, Black (02300BK08330) Zebra 2300 Wax Ribbon 83 mm × 300 m02300BK0833083 mm 300 m Wax Outside25.4 mm156,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 89 mm × 450 m, Out, Black (03200BK08945) Zebra 3200 Wax/Resin Ribbon 89 mm × 450 m03200BK0894589 mm 450 m Wax/Resin Outside25.4 mm505,00 Kč+VATIn stock
    Zebra 4800 Resin Ribbon 110 mm × 450 m, Out, Black (04800BK11045) Zebra 4800 Resin Ribbon 110 mm × 450 m04800BK11045110 mm 450 m Resin Outside25.4 mm890,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 60 mm × 300 m, Out, Black (02300BK06030) Zebra 2300 Wax Ribbon 60 mm × 300 m02300BK0603060 mm 300 m Wax Outside25.4 mm113,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 83 mm × 450 m, Out, Black (02300BK08345) Zebra 2300 Wax Ribbon 83 mm × 450 m02300BK0834583 mm 450 m Wax Outside25.4 mm228,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300BK11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300BK11030110 mm 300 m Wax Outside25.4 mm206,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 60 mm × 450 m, Out, Black (02300BK06045) Zebra 2300 Wax Ribbon 60 mm × 450 m02300BK0604560 mm 450 m Wax Outside25.4 mm165,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m, Out, Black (03200BK08330) Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m03200BK0833083 mm 300 m Wax/Resin Outside25.4 mm318,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300GT11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300GT11030110 mm 300 m Wax Outside25.4 mm217,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m, Out, Black (03200BK06030) Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m03200BK0603060 mm 300 m Wax/Resin Outside25.4 mm230,00 Kč+VATIn stock
    Zebra 3400 Wax/Resin Ribbon 83 mm × 450 m, Out, Black (03400BK08345) Zebra 3400 Wax/Resin Ribbon 83 mm × 450 m03400BK0834583 mm 450 m Wax/Resin Outside25.4 mm374,00 Kč+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 450 m, Out, Black (02300BK11045) Zebra 2300 Wax Ribbon 110 mm × 450 m02300BK11045110 mm 450 m Wax Outside25.4 mm303,00 Kč+VATIn stock
    Zebra 3400 Wax/Resin Ribbon 60 mm × 450 m, Out, Black (03400BK06045) Zebra 3400 Wax/Resin Ribbon 60 mm × 450 m03400BK0604560 mm 450 m Wax/Resin Outside25.4 mm270,00 Kč+VATIn stock
    Zebra 2100 Wax Ribbon 110 mm × 450 m, Out, Black (02100BK11045) Zebra 2100 Wax Ribbon 110 mm × 450 m02100BK11045110 mm 450 m Wax Outside25.4 mm352,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 60 mm × 450 m, Out, Black (03200BK06045) Zebra 3200 Wax/Resin Ribbon 60 mm × 450 m03200BK0604560 mm 450 m Wax/Resin Outside25.4 mm341,00 Kč+VATIn stock
    Zebra 1600 Wax Ribbon 110 mm × 450 m, Out, Black (01600BK11045) Zebra 1600 Wax Ribbon 110 mm × 450 m01600BK11045110 mm 450 m Wax Outside25.4 mm231,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (03200BK11030) Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m03200BK11030110 mm 300 m Wax/Resin Outside25.4 mm421,00 Kč+VATIn stock
    Zebra 3400 Wax/Resin Ribbon 110 mm × 450 m, Out, Black (03400BK11045) Zebra 3400 Wax/Resin Ribbon 110 mm × 450 m03400BK11045110 mm 450 m Wax/Resin Outside25.4 mm496,00 Kč+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 450 m, Out, Black (03200BK11045) Zebra 3200 Wax/Resin Ribbon 110 mm × 450 m03200BK11045110 mm 450 m Wax/Resin Outside25.4 mm625,00 Kč+VATIn stock
    Zebra 5100 Resin Ribbon 40 mm × 450 m, Out, Black (05100BK04045) Zebra 5100 Resin Ribbon 40 mm × 450 m05100BK0404540 mm 450 m Resin Outside25.4 mm737,00 Kč+VATOut of stock View
    Zebra Image Lock Resin Ribbon 60 mm × 300 m, Out, Black (74776) Zebra Image Lock Resin Ribbon 60 mm × 300 m7477660 mm 300 m Resin Outside25.4 mm2.619,00 Kč+VATOut of stock View
    Zebra Image Lock Resin Ribbon 80 mm × 300 m, Out, Black (74777) Zebra Image Lock Resin Ribbon 80 mm × 300 m7477780 mm 300 m Resin Outside25.4 mm3.492,00 Kč+VATOut of stock View
    Zebra Resin Ribbon 83 mm × 450 m, Out, White (74702) Zebra Resin Ribbon 83 mm × 450 m7470283 mm 450 m Resin Outside25.4 mm3.545,00 Kč+VATOut of stock View
    Zebra 4800 Resin Ribbon 89 mm × 450 m, Out, Black (04800BK08945) Zebra 4800 Resin Ribbon 89 mm × 450 m04800BK0894589 mm 450 m Resin Outside25.4 mm721,00 Kč+VATOut of stock View
    Zebra 5319 Wax Ribbon 102 mm × 450 m, Out, Black (05319BK10245) Zebra 5319 Wax Ribbon 102 mm × 450 m05319BK10245102 mm 450 m Wax Outside25.4 mm570,00 Kč+VATOut of stock View
    Zebra Image Lock Resin Ribbon 110 mm × 300 m, Out, Black (74917) Zebra Image Lock Resin Ribbon 110 mm × 300 m74917110 mm 300 m Resin Outside25.4 mm4.800,00 Kč+VATOut of stock View
    Zebra 2300 Wax Ribbon 40 mm × 450 m, Out, Black (02300BK04045) Zebra 2300 Wax Ribbon 40 mm × 450 m02300BK0404540 mm 450 m Wax Outside25.4 mm110,00 Kč+VATOut of stock View
    Zebra 5100 Resin Ribbon 60 mm × 450 m, Out, Black (05100BK06045) Zebra 5100 Resin Ribbon 60 mm × 450 m05100BK0604560 mm 450 m Resin Outside25.4 mm1.105,00 Kč+VATOut of stock View
    Zebra 2100 Wax Ribbon 80 mm × 450 m, Out, Black (02100BK08045) Zebra 2100 Wax Ribbon 80 mm × 450 m02100BK0804580 mm 450 m Wax Outside25.4 mm256,00 Kč+VATOut of stock View
    Zebra 5100 Resin Ribbon 83 mm × 450 m, Out, Black (05100BK08345) Zebra 5100 Resin Ribbon 83 mm × 450 m05100BK0834583 mm 450 m Resin Outside25.4 mm1.533,00 Kč+VATOut of stock View
    Zebra 5100 Resin Ribbon 89 mm × 450 m, Out, Black (05100BK08945) Zebra 5100 Resin Ribbon 89 mm × 450 m05100BK0894589 mm 450 m Resin Outside25.4 mm1.639,00 Kč+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 102 mm × 450 m, Out, Black (03200BK10245) Zebra 3200 Wax/Resin Ribbon 102 mm × 450 m03200BK10245102 mm 450 m Wax/Resin Outside25.4 mm579,00 Kč+VATOut of stock View
    Zebra 5100 Resin Ribbon 110 mm × 450 m, Out, Black (05100BK11045) Zebra 5100 Resin Ribbon 110 mm × 450 m05100BK11045110 mm 450 m Resin Outside25.4 mm2.025,00 Kč+VATOut of stock View
    Zebra 2100 Wax Ribbon 40 mm × 450 m, Out, Black (02100BK04045) Zebra 2100 Wax Ribbon 40 mm × 450 m02100BK0404540 mm 450 m Wax Outside25.4 mm129,00 Kč+VATOut of stock View
    Zebra Resin Ribbon 60 mm × 450 m, Out, White (74736) Zebra Resin Ribbon 60 mm × 450 m7473660 mm 450 m Resin Outside25.4 mm2.136,00 Kč+VATOut of stock View
    Zebra 1600 Wax Ribbon 83 mm × 450 m, Out, Black (01600BK08345) Zebra 1600 Wax Ribbon 83 mm × 450 m01600BK0834583 mm 450 m Wax Outside25.4 mm174,00 Kč+VATOut of stock View
    Zebra 5319 Wax Ribbon 89 mm × 450 m, Out, Black (05319BK08945) Zebra 5319 Wax Ribbon 89 mm × 450 m05319BK0894589 mm 450 m Wax Outside25.4 mm497,00 Kč+VATOut of stock View
    Zebra 3400 Wax/Resin Ribbon 102 mm × 450 m, Out, Black (03400BK10245) Zebra 3400 Wax/Resin Ribbon 102 mm × 450 m03400BK10245102 mm 450 m Wax/Resin Outside25.4 mm459,00 Kč+VATOut of stock View
    Zebra Resin Ribbon 110 mm × 450 m, Out, White (74912) Zebra Resin Ribbon 110 mm × 450 m74912110 mm 450 m Resin Outside25.4 mm4.698,00 Kč+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 40 mm × 450 m, Out, Black (03200BK04045) Zebra 3200 Wax/Resin Ribbon 40 mm × 450 m03200BK0404540 mm 450 m Wax/Resin Outside25.4 mm228,00 Kč+VATIn stock
    Zebra 1600 Wax Ribbon 60 mm × 450 m, Out, Black (01600BK06045) Zebra 1600 Wax Ribbon 60 mm × 450 m01600BK0604560 mm 450 m Wax Outside25.4 mm126,00 Kč+VATOut of stock View
    Zebra 5319 Wax Ribbon 83 mm × 450 m, Out, Black (05319BK08345) Zebra 5319 Wax Ribbon 83 mm × 450 m05319BK0834583 mm 450 m Wax Outside25.4 mm463,00 Kč+VATOut of stock View
    Zebra 2100 Wax Ribbon 89 mm × 450 m, Out, Black (02100BK08945) Zebra 2100 Wax Ribbon 89 mm × 450 m02100BK0894589 mm 450 m Wax Outside25.4 mm285,00 Kč+VATOut of stock View
    Zebra 5319 Wax Ribbon 110 mm × 300 m, Out, Gold (05319GD11030) Zebra 5319 Wax Ribbon 110 mm × 300 m05319GD11030110 mm 300 m Wax Outside25.4 mm1.851,00 Kč+VATOut of stock View

    Compatible labels

    ProductSize (W × H) Material Labels / rollCorePrice
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 101.6 mm, H: 152.4 mm, D: 200 mm, C: 76 mm (76180) Zebra Z-Perform 1000T76180101.6 × 152.4 mm Normal Paper 95076 mm559,00 Kč+VATOut of stock View
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 50.8 mm, D: 200 mm, C: 76 mm (800630-205) Zebra Z-Select 2000T800630-20576.2 × 50.8 mm Normal Paper 329276 mm699,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 101.6 mm, H: 152.4 mm, D: 200 mm, C: 76 mm (880350-152) Zebra Z-Ultimate 3000T White880350-152101.6 × 152.4 mm Synthetic 95076 mm3.317,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 50.8 mm, H: 25.4 mm, D: 200 mm, C: 76 mm (76051) Zebra Z-Select 2000T7605150.8 × 25.4 mm Normal Paper 518076 mm484,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 31.75 mm, D: 200 mm, C: 76 mm (3006324) Zebra Z-Select 2000T300632457.15 × 31.75 mm Normal Paper 508776 mm566,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 38.1 mm, H: 19.05 mm, D: 200 mm, C: 76 mm (880114-019) Zebra Z-Select 2000T880114-01938.1 × 19.05 mm Normal Paper 674276 mm456,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 69.85 mm, H: 31.75 mm, D: 200 mm, C: 76 mm (76054) Zebra Z-Select 2000T7605469.85 × 31.75 mm Normal Paper 424076 mm605,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 76.2 mm, H: 50.8 mm, D: 200 mm, C: 76 mm (76536) Zebra Z-Ultimate 3000T7653676.2 × 50.8 mm Synthetic 277976 mm3.015,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 20 mm, H: 10 mm, D: 200 mm, C: 76 mm (3010243) Zebra Z-Ultimate 3000T301024320 × 10 mm Synthetic 1415076 mm1.220,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 69.85 mm, H: 31.75 mm, D: 200 mm, C: 76 mm (76014) Zebra Z-Ultimate 3000T7601469.85 × 31.75 mm Synthetic 429576 mm2.487,00 Kč+VATOut of stock View
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 50.8 mm, H: 25.4 mm, D: 200 mm, C: 76 mm (76535) Zebra Z-Ultimate 3000T7653550.8 × 25.4 mm Synthetic 524976 mm1.961,00 Kč+VATOut of stock View
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 88.9 mm, H: 25.4 mm, D: 200 mm, C: 76 mm (76178) Zebra Z-Perform 1000T7617888.9 × 25.4 mm Normal Paper 518076 mm522,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 60 mm, H: 30 mm, D: 200 mm, C: 76 mm (87539) Zebra Z-Ultimate 3000T White8753960 × 30 mm Synthetic 500076 mm2.230,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 100 mm, H: 150 mm, D: 200 mm, C: 76 mm (3005091) Zebra Z-Perform 1000T3005091100 × 150 mm Normal Paper 100076 mm629,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 76.2 mm, H: 50.8 mm, D: 200 mm, C: 76 mm (76175) Zebra Z-Perform 1000T7617576.2 × 50.8 mm Normal Paper 274076 mm451,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 101.6 mm, H: 50.8 mm, D: 200 mm, C: 76 mm (880350-050) Zebra Z-Ultimate 3000T880350-050101.6 × 50.8 mm Synthetic 274076 mm3.317,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 57.15 mm, H: 31.75 mm, D: 200 mm, C: 76 mm (76173) Zebra Z-Perform 1000T7617357.15 × 31.75 mm Normal Paper 424076 mm383,00 Kč+VATOut of stock View
    Labels, Zebra, Synthetic, 8000T Void Matte, W: 50.8 mm, H: 25.4 mm, D: 200 mm, C: 76 mm (3006690) Zebra 8000T Void Matte300669050.8 × 25.4 mm Synthetic 250076 mm2.462,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 76.2 mm, H: 57.15 mm, D: 200 mm, C: 76 mm (3004608) Zebra Z-Ultimate 3000T300460876.2 × 57.15 mm Synthetic 301076 mm3.066,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 76.2 mm, D: 200 mm, C: 76 mm (3006326) Zebra Z-Select 2000T3006326101.6 × 76.2 mm Normal Paper 223876 mm922,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 76.2 mm, H: 76.2 mm, D: 200 mm, C: 76 mm (3002066) Zebra Z-Perform 1000T300206676.2 × 76.2 mm Normal Paper 215076 mm964,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 19.05 mm, D: 200 mm, C: 76 mm (3006323) Zebra Z-Select 2000T300632357.15 × 19.05 mm Normal Paper 799576 mm566,00 Kč+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 101.6 mm, H: 101.6 mm, D: 200 mm, C: 76 mm (880350-101) Zebra Z-Ultimate 3000T White880350-101101.6 × 101.6 mm Synthetic 143276 mm3.317,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 152.4 mm, D: 200 mm, C: 76 mm (76060) Zebra Z-Select 2000T76060101.6 × 152.4 mm Normal Paper 95076 mm800,00 Kč+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 100 mm, H: 100 mm, D: 200 mm, C: 76 mm (3004645) Zebra Z-Perform 1000T3004645100 × 100 mm Normal Paper 167076 mm559,00 Kč+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 101.6 mm, H: 152.4 mm, D: 200 mm, C: 76 mm (87809) Zebra Z-Perform 1000D87809101.6 × 152.4 mm Thermal Paper 95076 mm701,00 Kč+VATIn stock
    Zebra Z-Perform 1000D, label roll, thermal paper, uncoated, for midrange/high end printers, core 76mm, diameter 200mm, dimensions (WxH) 57x32mm, 4470 labels/roll, free of Bisphenol A (3006307-T) Zebra Z-Perform 1000D3006307-T57 × 32 mm Thermal Paper 447076 mm441,00 Kč+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 76.2 mm, H: 50.8 mm, D: 200 mm, C: 76 mm (3005807) Zebra Z-Perform 1000D300580776.2 × 50.8 mm Thermal Paper 310076 mm628,00 Kč+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 101.6 mm, H: 152.4 mm, D: 200 mm, C: 76 mm (3007096-T) Zebra Z-Perform 1000D3007096-T101.6 × 152.4 mm Thermal Paper 95076 mm716,00 Kč+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 101.6 mm, H: 76.2 mm, D: 200 mm, C: 76 mm (880170-076) Zebra Z-Select 2000D880170-076101.6 × 76.2 mm Thermal Paper 189076 mm1.049,00 Kč+VATIn stock

    More ZT610 guides

    ZT610 SetupZebra ZT610 and ZT620 setup guide: from unboxing to first label30 min · Medium ZT610 How-toCalibrate the Zebra ZT610 and ZT620: sensors and skipped labels10 min · Easy ZT411 ComparisonZebra ZT411 vs ZT610: which 4-inch industrial printer?5 min · Easy
    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    Zebra ZT610 Industrial Printer (ZT61042-T0E0100Z)46.412,00 Kč+VAT View product