

What's in the box – RAM-101B2-UN9U
Drill-Down Dashboard Mount with Steel Backing Plate, C-Size, Short Arm
RAM Mounts X-Grip Dashboard Mount with Backing Plate for 9"-11" Tablets (RAM-101B2-UN9U) holds a full-size tablet – an iPad, Galaxy Tab S or Tab Active Pro, for example – on a vehicle dashboard. The four spring-loaded arms of the X-Grip close around the device, case included, and release it when you pull the grip knobs on the back. A short C-size drill-down mount with a threaded steel backing plate carries the weight of a 10" tablet close to the dash.
To bring the tablet closer to the driver, swap to the medium or long C-size arm. Smaller 7–8" tablets fit the Tab-Tite version of this kit.
Key Features
- Fits 9–11" tablets in a case – width 158.8–205.7 mm (6.25"–8.1"), depth up to 22.2 mm (0.875"), height up to 260.4 mm (10.25") with the optional supports
- Quick release – grip knobs on the back of the holder open the X to take the tablet out
- Rubber-capped arms – the spring-loaded X design holds firmly without covering the screen
- Steel backing plate – 53.3 × 66 mm (2.10" × 2.60") with #8-32 threaded holes, for thin dashboards
- Short C-size arm – 63.5 mm (2.5") socket to socket; rated 1.8 kg (4 lb) standard and 1.36 kg (3 lb) heavy-duty
In service vehicles and vans
The X-Grip leaves the screen and most edges uncovered, so the tablet can be used for navigation, job lists or forms while docked. The 53.3 × 66 mm steel plate goes behind the dashboard panel to clamp the base firmly. Choose a dashboard position outside airbag deployment zones.
Compatibility
- Listed by RAM, for example: Apple iPad 3rd–11th gen., iPad Air 1–5 and Air 11" (M2, M3, M4), iPad Pro 11" 1st–4th gen. and M4/M5
- Samsung Galaxy Tab S2/S3 9.7, S4 10.5, S5e, S6, S7 FE, S7+, S8+, S9+, S9 FE+, S10+, Tab A 10.5, A8 10.5, A9+, A11+, Tab Active Pro, Active4 Pro, Active5 Pro, Galaxy Book 10.6
- Microsoft Surface Go and Go 2; Lenovo Miix 720, Tab 4 10, Tab 4 10 Plus, Tab K11, Tab P12 Pro, ThinkTab X11; Amazon Fire HD 10
- ASUS ZenPad 10, 3S 10, Z10; Huawei MediaPad M3 Lite 10, T3 10; Nexa RHINO T100; Nokia T21; Nuu Mobile Tab 10
- All RAM C-size (38.1 mm / 1.5") parts
Technical Specifications
| Part Number | RAM-101B2-UN9U |
|---|---|
| Kit Contents | RAM-HOL-UN9U X-Grip holder, RAM-101-B-225B2U dashboard mount (RAM-201U-B arm, RAM-202U round plate, RAM-202-225-2U base with backing plate) |
| Device Size | Width 158.8–205.7 mm; depth up to 22.2 mm; height up to 260.4 mm with optional supports |
| Ball Size | C, 38.1 mm (1.5") |
| Arm | Short, 63.5 mm (2.5") socket to socket |
| Hole Pattern | AMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm |
| Load Capacity | 1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use |
| Materials | Marine-grade aluminium, high-strength composite, steel |
| Mounting Type | Drill-down with backing plate |
| Weight | 1.03 kg (2.28 lb) |
| In the Box | X-Grip holder, short dashboard mount, steel backing plate, 4× #8-32 x 1" screws, 4 split lock washers, 4 flat washers, assembly hardware |
Equipping engineers' vans or a sales fleet with full-size tablets? As an Official RAM Mounts Reseller we supply one standard dashboard kit for mixed tablet models and quote the rollout.
Questions about RAM-101B2-UN9U
Will my iPad in a rugged case fit?
Measure it with the case on: it must be 158.8–205.7 mm wide and no more than 22.2 mm deep. Thicker rugged cases will not fit the X-Grip.
What does RAM-101B2-UN9U do that RAM-101B2-TAB23U does not?
It takes larger 9–11" tablets in an X-Grip, while RAM-101B2-TAB23U uses a Tab-Tite holder for 7–8" tablets. Both share the short dashboard mount with steel backing plate.
Can I fit it without drilling?
No, the base bolts through the dashboard into the backing plate. The X-Grip holder itself can be combined with other RAM C-size bases.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
