

What's in the box – RAM-VP-SW1-45-240
For a Tough-Dock that should stay low over the console, RAM's 4" + 5" Tele-Pole set with large round plate (RAM-VP-SW1-45-240) keeps the poles at 312–338 mm on a pole-less RAM vehicle base. The female 5" section bolts down with four carriage bolts, the 4" section slides in, and the swing arm presents a Ø 93.5 mm plate whose holes line up with RAM Tough-Dock stations.
Not using a dock? The swivel socket also takes the AMPS round plate or the 75 × 75 mm VESA plate. For a taller dock position, see the 8" + 9" version.
Key Features
- Tough-Dock holes ready – the Ø 93.5 mm (3.68") RAM-240U plate is pre-drilled for RAM Tough-Dock powered docking stations
- Low dock position – 4" + 5" poles, adjustable from 312 to 338 mm (12.3"–13.3")
- Swivel socket at the arm tip – the plate's 38.1 mm (1.5") ball turns and tilts in the socket; rated 1.8 kg (4 lb)
- Bolt-down lower pole – 88.9 mm (3.5") square plate with four carriage bolts, hex nuts, flat and split lock washers
- Swing arm reach – 305 mm (12") double swing arm moves the dock sideways
Compatibility
- RAM vehicle bases without a welded female Tele-Pole
- RAM Tough-Dock powered docking stations (pre-drilled plate)
- Other RAM C-size ball plates in the swivel socket
Technical Specifications
| Part Number | RAM-VP-SW1-45-240 |
|---|---|
| Kit Contents | RAM-VP-TTM4U 4" upper pole, RAM-VP-TBF5U 5" lower pole, RAM-VB-110-1NBU 12" double swing arm with swivel socket, RAM-240U large round plate with C-size ball |
| Poles | Upper 102 mm (4"), male; lower 127 mm (5"), female, with 88.9 × 88.9 mm (3.5") plate |
| Height Range | 312–338 mm (12.3"–13.3") |
| Swing Arm | Double swing arm with swivel socket, 305 mm (12") |
| Ball Size | C, 38.1 mm (1.5") |
| Plate Size | Ø 93.5 mm (3.68") round plate |
| Hole Pattern | Tele-Pole 66.7 × 66.7 mm (2.625" × 2.625"); Large round plate: 3-hole 120° (large), pre-drilled for RAM Tough-Dock |
| Load Capacity | 1.8 kg (4 lb) on the C-size ball and socket |
| Materials | Powder-coated steel, marine-grade aluminium |
| Mounting Type | Drill-down: the lower pole bolts to a RAM vehicle base without a welded female pole |
| Hardware | Assembly hardware; 4× 5/16"-18 × 1" carriage bolts, 4 hex nuts, 4 flat washers, 4 split lock washers, 4 rubber caps |
| In the Box | 4" upper pole, 5" lower pole, 12" double swing arm with swivel socket, large round plate with C-size ball, assembly hardware, carriage bolts, nuts, washers, rubber caps |
Low dock positions across a car fleet? As an Official RAM Mounts Reseller we quote dock, pole set and vehicle base together.
Questions about RAM-VP-SW1-45-240
Is a docking station included?
No. The kit holds the two poles, the swing arm, the pre-drilled RAM-240U plate and the bolt-down hardware; the Tough-Dock for your device is a separate order.
What does the 'large' plate change compared with RAM-VP-SW1-45?
RAM-VP-SW1-45 ends in a Ø 63.5 mm AMPS plate. This set uses a Ø 93.5 mm plate with the larger 3-hole 120° pattern that RAM Tough-Docks use, held in a swivel socket.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.



