

What's in the box – RAM-HOL-TAB17U
For a full-size iPad that stays in its case, RAM Mounts Tab-Tite Holder for Apple iPad Gen 1–4 with Case + More (RAM-HOL-TAB17U) is the holder RAM uses across its large-tablet kits. The cups open to 162–210 mm wide and 27.9 mm deep, and RAM's list now runs from the iPad 3rd and 4th Gen to the iPad Air 4 and 5 and the iPad Pro 11 1st–4th Gen – all in a case. It bolts to a B- or C-size RAM ball plate.
Mount it with a B-size round plate and medium arm, or buy it ready-built: the flat surface mount, Twist-Lock suction cup mount, Tough-Claw clamp mount and dual suction cup mount all use this holder.
Key Features
- For full-size iPads in a case – iPad 3rd and 4th Gen, iPad Air 4 and 5, iPad Pro 11 1st–4th Gen, each with case
- Deep, wide range – height 241–298 mm (9.5"–11.75"), width 162–210 mm (6.375"–8.25"), depth 3.3–27.9 mm (0.13"–1.1")
- Ready for a device change – swap the cup pair for another Tab-Tite set when the tablet changes
- Controls left free – the end cups leave buttons and ports usable while the iPad is docked
- B- or C-size mounting – AMPS 4-hole back (30 × 38 mm) with #8-32 screws in two lengths and nyloc nuts
Compatibility
- Apple iPad (3rd and 4th Gen), iPad Air 4, iPad Air 5, iPad Pro 11 (1st–4th Gen) – all with case
- Other tablets 241–298 mm tall, 162–210 mm wide and up to 27.9 mm deep
- RAM B- and C-size round ball bases with the AMPS 4-hole pattern
Technical Specifications
| Part Number | RAM-HOL-TAB17U |
|---|---|
| Kit Contents | RAM-HOL-ACU backplate, RAM-HOL-TAB17-CUPSU end cups |
| Compatible Devices | Apple iPad (3rd and 4th Gen), iPad Air 4, iPad Air 5, iPad Pro 11 (1st–4th Gen) – all with case |
| Device Size | Height 241–298 mm (9.5"–11.75"); width 162–210 mm (6.375"–8.25"); depth 3.3–27.9 mm (0.13"–1.1") |
| Hole Pattern | AMPS 4-hole 30 × 38 mm (1.181" × 1.496") |
| Materials | High-strength composite |
| Weight | 0.31 kg (0.69 lb) |
| In the Box | Backplate, end cups for iPad with case, assembly hardware |
Rolling out iPads in cases to service vans, forklifts or field crews? As an Official RAM Mounts Reseller we supply this holder on its own or in RAM's complete kits and quote the whole fleet.
Complete RAM mounts with this part (7)
Every complete mount below includes this part.
Tab-Tite Large Tablet Holder with Double U-Bolt Rail Mount, C-Size, Medium Arm
3.666,00 Kč +VATIn stock
Tab-Tite Drill-Down Mount for 10" Tablets in Heavy-Duty Cases, C-Size
3.234,00 Kč +VATIn stock
Tab-Tite Large Tablet Mount with Twist-Lock Suction Cup, C-Size, Medium Arm
3.601,00 Kč +VATOut of stock
Tab-Tite Dual Suction Mount for iPad 1–4 with Case, Extended Knob, B-Size, Short Arm
3.589,00 Kč +VATOut of stock
Tab-Tite Dual Suction Mount for iPad Gen 1–4 with Case, Extended Knob, B-Size, Medium Arm
5.599,00 Kč +VATOut of stock
Tab-Tite Tablet Mount with Twist-Lock Dual Suction Cup Base, C-Size
4.588,00 Kč +VATIn stock
Tab-Tite Large Tablet Mount with Medium Tough-Claw for iPad with Case, C-Size, Medium Arm
4.393,00 Kč +VATIn stock
Questions about RAM-HOL-TAB17U
Does RAM-HOL-TAB17U fit an iPad Pro 11 in a case?
Yes. RAM lists the iPad Pro 11 from 1st to 4th Gen with case, as well as the iPad 3rd/4th Gen and iPad Air 4 and 5 with case.
Is it safe to use on rough ground or in an open cockpit?
RAM recommends adding a tether for off-road use and in open cockpits, so the tablet stays attached if it is knocked out.
Which complete mounts use this holder?
RAM-138-TAB17U (flat surface), RAM-166-TAB17U (suction cup), RAP-404-TAB17U (Tough-Claw), RAM-138-235-TAB17U (double U-bolt) and the dual suction kits, including RAM-HOL-TAB17-189BU.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

