

RAM Mounts RAM ROD Flush Spline Post Base (RAM-114FMU) turns a gunwale into a low-profile rod position. The socket drops into a 35.6 mm (1.4") hole and the flange is screwed down through four pre-drilled corners, leaving only a flat plate on deck. RAM uses it in six rod holder kits, from the RAM ROD holder with flush base to the Tough-Tube with flush base.
Need a holder? The RAM ROD holder with 6" spline post fits the socket. For a round alternative, see the RAM ROD Round Flush Base.
Key Features
- Sits low in the gunwale – the socket goes into a 35.6 mm (1.4") hole, so only the flange stays above the surface
- Four-point fixing – pre-drilled holes at each corner on a 33 × 81 mm (1.3" × 3.19") pattern
- Rubber cap built in – closes the socket when the holder is out, so water does not collect in it
- Spline-post socket – for RAM ROD and RAM Tube rod holders with a spline post
- Light composite – high-strength composite, about 95 g
Compatibility
- RAM ROD and RAM Tube rod holders with a spline post
- Gunwales and decks of power boats and kayaks with room for a 35.6 mm (1.4") hole
Technical Specifications
| Part Number | RAM-114FMU |
|---|---|
| Socket | Spline post (RAM ROD / RAM Tube) |
| Cut-out | Ø 35.6 mm (1.4") |
| Hole Pattern | 33 × 81 mm (1.3" × 3.19"), 4 pre-drilled holes |
| Mounting Type | Flush, drill-down |
| Materials | High-strength composite |
| Weight | 0.10 kg (0.21 lb) |
| In the Box | Flush base with integrated rubber cap |
Boatbuilders and dealers who fit rod positions as standard can order these bases from us in volume – SCANSHOP is an Official RAM Mounts Reseller.
Complete RAM mounts with this part (5)
Every complete mount below includes this part.
RAM ROD Fishing Rod Holder with Flush Mounting Base and 6" Spline Post
1.094,00 Kč +VATOut of stock
RAM Tube Fishing Rod Holder with Flush Base, 6" Spline Post
1.236,00 Kč +VATOut of stock
Light-Speed Fishing Rod Holder with Flush Base
2.206,00 Kč +VATOut of stock
Tube Jr. Rod Holder with Flush Base, 6" Post
1.000,00 Kč +VATOut of stock
Tough-Tube Rod Holder with Square Flush Base
1.147,00 Kč +VATOut of stock
Questions about RAM-114FMU
What size hole do I need?
A 35.6 mm (1.4") hole for the socket, plus four screw holes at the corners of the flange on a 33 × 81 mm pattern.
Which holders fit RAM-114FMU?
Spline-post holders from the RAM ROD and RAM Tube ranges, such as RAM-114-NBU. RAM's own kits pair this base with RAM ROD, RAM Tube, Light-Speed, Tube Jr. and Tough-Tube holders.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.