Guides

The TM-T20IV, TM-m30III and TM-T88VII print on 80 mm paper out of the box, and all three can switch to 58 mm rolls. The change has...

The ZD421 and ZD411 are the same printer platform in two widths. They share the speeds, resolutions, buttons, lights and options, and Zebra documents them together....

This guide takes a new Zebra ZD421 from the box to a calibrated first label. It covers all three versions: the ZD421t with a ribbon roll,...

The ZD421 has no display, so it reports problems through five indicator lights. Green means ready, amber means busy or a warning, red means the printer...

The ZD421 has two separate resets: one for the printer settings and one for the network settings. You start either with a button combination at power-up,...

Calibration tells the ZD421 how long your labels are and where each one starts. Without it, the printer may skip labels, print across the gaps or...

This guide takes a new ZD220 or ZD230 from the box to a first printed label. It covers both versions: the direct thermal models (ZD220d, ZD230d)...

The ZD220 and ZD230 have no display, so the single STATUS light on top of the printer tells you what is wrong. Match its colour and...

Calibration teaches the ZD220 or ZD230 where each label starts. Zebra calls the automatic routine SmartCal. On these printers you start it with the FEED button;...

The ZD220 and ZD230 look the same and share the same user guides, the same controls and the same 104 mm print width at 203 dpi....

The TC22 and TC27 are the same Android mobile computer with one difference: the TC27 adds a mobile network. The TC22 works over Wi-Fi and Bluetooth...

Most TC22 and TC27 problems come down to the battery, the charger, the DataWedge scanning service or Wi-Fi. Every fix below applies to both models. Check...